Installation Requirements Of SPC Vinyl Flooring

Waterproof SPC Vinyl flooring is mainly made of calcium powder and is very popular in the home improvement market in foreign countries. It is very suitable for the home floor. Let's take a look at its installation requirements!

1. The construction of the floor has high requirements on the base layer, and the quality of the floor affects the construction effect and performance of the SPC vinyl floor.

2. Because it is a non-natural material, the base layer is required to be high, and the base layer must be flat, solid and dry when the floor is laid.

3. The basic requirements of the ground: the surface of the cement floor can not have sand. Ground hardness: The screed cement and mortar volume ratio should be less than 1:3. It is required to use Dachang cement, the cement concrete strength grade is not less than C20, and the surface hardness should not be less than 2Mpa.

4. The surface of the luxury SPC vinyl floor is smooth, the yin and yang angles are square, no ribs, no oil, dust and impurities. The smoothness of the surface of the ground: the surface of the ground surface should be smooth and flat, requiring "smear finish"

5. Ground cracks: If the foundation settlement occurs, the crack shall not exceed the crack with a width of 1.0 mm. Ground compactness: The surface of the ground should not be too rough, there should be no excessive pores, and there should be no holes and potholes. The surface of the ground should be smooth and smooth.

6. Surface moisture: The ground base moisture content is less than 8%, and the surface is kept dry before construction. Ground elevation: The height of the bottom edge of the door will not affect the opening of the door due to the laying of the floor.

7. No cross-construction: There should be no cross-construction during self-leveling construction and floor bonding. Any other work should ensure that it does not damage self-leveling and the floor.